SEARCH THE SITE
ABOUT US
STORE SECTIONS
Ripmax Chargers
Online Shop
>
ACCESSORIES
>
Ripmax Chargers
Pro-Peak AC Delta Base – Fast Chgr.
Ref: O-IP1500
A simple to use, mains input charger designed for charging 4 to 8 cell Ni-Cd and Ni-MH packs. Its Delta Peak cut-off and automatic switch over to a maintenance trickle charge means it's ideal for fast charging or topping up charging transmitter and receiver packs. With a choice of three switchable output currents of 0.5, 1.0 and 2.5A it is suitable for a wide variety of applications.
Specifications:
• 110-240V AC 50/60Hz input
• Switchable 0.5/1/2.5A charge rates
• Fast or trickle charge 4~8 cell Ni-Cd or
Ni-MH packs
• Delta Peak fast charge termination
• Auto trickle charge following fast charge
• 3-way adapter lead included with BEC and Futaba compatible transmitter/receiver connectors.
Price: £13.00
Quantity:
Pro-Peak AC Delta 3 (2/3.5/5A)F.Chg
Ref: O-IP1505
Like the Delta Base charger shown left, the new Delta 3 is also designed for charging 4 to 8 cell Ni-Cd and Ni-MH packs. It too has a 110~240v AC mains input but it has a three higher output currents -
2, 3.5 and 5 Amps. A physically larger unit, it has an internal fan to keep it cool during the charge period.
Specification:
• 110-240V AC 50/60Hz input
• Switchable 2/3.5/5A charge rates
• Fast or trickle charge 4-8 Ni-Cd or Ni-MH packs
• Delta Peak fast charge termination
• Auto trickle charge following fast charge
• 3-way adapter lead included with BEC and Futaba compatible transmitter/reciever connectors
Price: £18.00
Quantity:
Power Supply 240>13.8v 20A Auto
Ref: O-IP2000
The ProPeak 13.8v power supply is a high quality switch mode power
supply with a particularly smooth output current, making it suitable for use
with almost all 12v input chargers available today. Using switch mode
technology gives greater efficiency and reduces the weight and size of the
power supply compared to older units. The maximum 20 Amp output
allows fast charging of even high voltage battery packs.
Pro Peak Power Supply
Technical Data:
• Input voltage range: 190~240v AC
• Output voltage: 13.8v DC regulated
• Current rating: 0~20 Amps
• Output connections: 4mm Banana/Clamp type
Price: £32.00
Quantity:
Power Supply 20A-13.8V Twin Output
Ref: O-IP2002
The new ProPeak dual output 13.8v power supply is a high quality
switch mode power supply with a particularly smooth output current,
making it suitable for use with almost all 12v input chargers available
today. The dual outputs allow easy connection of two chargers, to take
advantage of the exceptionally high maximum current of 20 Amps, and
the LCD readout gives at a glance an exact reading of the current being
supplied by the power supply.
Technical Data:
• Input voltage range: 190~240v AC
• Output voltage: 13.8v DC regulated
• Current rating: 0~20 Amps
• Output connections: Twin 4mm Banana/Clamp type
• LCD Amperage readout
Price: £39.00
Quantity:
7.2~8.4V Mains Slow Charger (UK)
Ref: O-TD7/8
The O-TD7/8 is a mains slow charger for 7.2v and 8.4v rechargeable batteries. The charger is fitted with Tamiya compatible output connector. The mains input is 230v 50Hz and the output is 250mA. This charger is produced to meet all European standards. This is a flexible and reliable unit for batteries between 600 and 3000mAh capacity.
Price: £5.99
Quantity:
Tx/Rx NiCad/Ni-MH Charger 70/70mA
Ref: P-FBC10D/4
Supplied with all nicaded Futaba systems, this 240v mains charger has combined transmitter and receiver outputs with two separate LED charge indicators. Two versions are available – one with 70mA receiver and transmitter output and one with an increased receiver output of 120mA, that's ideal for today's higher capacity battery packs. Both are designed for overnight battery charging.
Price: £11.99
Quantity:
Power Supply 230~13.8v 8.5A
Ref: O-IP2004
This brand new 13.8v, 8.5A Power Supply is suitable for use with almost all 12v input chargers available today. Despite its compact size, it is still able to deliver currents up to 8.5 Amps, making it ideal for all `sport' charging applications.
Technical Data:
• Input Voltage: 230v AC
• Output voltage: 13.8v DC regulated
• Current rating: 0~8.5 Amps
• Output connections: 4mm Banana/Clamps
Price: £24.00
Quantity:
Pro-Peak 12v 700mah SLA Chargr
Ref: O-IP1012
Price: £12.00
Quantity:
Sigma EQ AC/DC Charger
Ref: O-IP2851
INTELLIGENT CHARGER, DISCHARGER, CYCLER AND BALANCER
The Pro-Peak Sigma EQ is a high performance unit for charging, discharging and cycling batteries at home or the field. Its integral Lithium Cell Balancing System makes it as versatile as it is practical. Suitable for 240v AC or 12v DC input, it comes complete with adaptor boards for cycling all major brands of Li-Po batteries.Its large backlit LCD makes monitoring of the Sigma EQ's charge or discharge progress clear and simple and during balancing, each cell's voltage is displayed.
• 11~15v DC or 100~240v AC Input
• Battery Type:
Li-Ion/Po – 1~6 Cells
LiFePO4 – 1~6 Cells
NiCd/MH – 1~14 Cells
Lead-Acid – 1~6 Cells
• Max Charge: 6A (2C Li-Po)
• Max Discharge: 1A
Up to 2C Charging!
Adaptor boards for Impulse, Flight Power and Thunder Power included!
240v Mains or 12v DC Input!
Price: £75.00
Quantity:
EQ-6+ LiPo Balancer w/Ld st & Cable
Ref: O-IPBAL-16
A sophisticated Balancer designed for Li-Po batteries containing 2 to 6 cells and capable of being networked and interfaced to the Sigma charger /discharger for even greater monitoring of the balancing process.
• Max Charge Rate: 10 Amps
Price: £29.00
Quantity:
Mains Charger – 12 Volt
Ref: O-BFB205
Mains Charger – 12 Volt
Price: £11.99
Quantity:
Quattro Plus AC/DC 1~4cell Li-Po Ch
Ref: O-IP2775
Specifically designed for 1 to 4 cell Li-Po packs, the new Quattro Plus has the additional benefit of 240v AC or 12v DC input. Great for charging at home or at the field!
One of the most compact and simplest-to-use chargers around, this reliable, high quality charger will get the very best out of 1~4 cell Li-Po battery packs.
Specification:
• Input Voltage Range: 11~15v DC or 100~240v AC
• Output Voltage: 3.7~14.8v DC
• Current Rating: Automatic – 0.1~3.0 Amps
• Automatic cell number detection (1 to 3 cells)
• Output Connection: JST Connector
• Input Connection: Crocodile clips and mains plug
Price: £33.00
Quantity:
Electrifly Triton2 DC Charger
Ref: O-GPMM3153
Great for a huge variety of battery types
(NiCd, NiMH, LiPo, Li-Ion, and lead-acid), and
applications such as electric airplane and heli
batteries, Tx and Rx batteries, car and boat
batteries, field batteries, and more. Triton2
adds upgraded features to the design of the
revolutionary original Triton charger, famous
for its high performance, versatility and rugged
durability. Charge current is increased to 7A. The
custom LCD now includes a blue backlight for
easy viewing. T2 can handle LiPo packs with up
to 5 cells in series. The input cord has installed
banana plugs and large attachable alligator clips
are included. The modified programming dial
is easier to control. And a slight programming
change, plus a totally new instruction manual for
ease of use and understanding.
Price: £97.00
Quantity:
Xing 4-7 Cell D.Peak DC Charger
Ref: O-SUNG-RP120
This superb lightweight mini charger for 4-7 cell NiCad or Ni-MH packs is reliable and simple to use. LED's indicate power, quick charge & trickle charge, and you can select the charge current you need, 1A, 2A or 4A. Specification:
• 12 volt input voltage
• Polarity protection
• Charge capacity: 4-7 cell
• Dimensions: 110 x 62 x 26 mm
• Trickle charge
• Weight: 130g
• Charge current: 1A, 2A, 4A switchable
Price: £19.00
Quantity:
Multi Plus 12 1-12C DC & GS Charger
Ref: O-SUNG-RP5000
The Multi Plus 12 is a 12 volt, Delta peak, FET quick charger, designed to charge NiCad or Ni-MH packs of up to 12 cells. The charge current is fully adjustable from 500 mA to 4200 mA so it can charge Tx, Rx or power packs. It's even got a built in glow start charging jack if you need it. Superb value for money, a must for electric flight modellers. Main Features:
• 12 volt input voltage
• Charges 1-12 cell NiCad/Ni-MH packs
• Fully adjustable 500mA – 4200mA charge current
• Delta peak detection with Auto cut off
• Pulsed trickle charge
• Includes Glowstart charging jack
• Reverse polarity protection
• Dimensions: 133 x 90 x 39 mm
• Weight: 500g
Pro-Peak 6v 500mah SLA Charger
Ref: O-IP1006
Pro-Peak 6v 500mah SLA Charger
Price: £8.99
Quantity:
Quattro 1~4 Cell Li Po Charger
Ref: O-IP2750
• Suitable for Charging 1~4
Li-Po Cells
• Microprocessor Controlled
• Automatic Charge Current
• Constant Current/Constant
• Voltage Charge Regime
• Reverse Polarity
• Protection on Input and Output
• Dimensions:
88.4 x 54.6 x 22.6mm
Price: £19.00
Quantity:
Electrifly Triton Jr. DC Charger
Ref: O-GPMM3152
Now you can get a charger with much of the
versatility of the Triton - for less! The Triton Jr. has
many of the same basic features of the original,
including the ability to charge, discharge and cycle,
and can be used with NiCd, NiMH, LiPo, Li-Ion,
and Pb batteries. It's smaller in size and lighter in
weight, so it's easier to transport and perfect for
smaller-sized electric flight applications.
• Ideal for small and large electric aircraft and heli
batteries, Tx and Rx packs and field batteries
• Charge at up to 5 amps, discharge up to 1 amp -
or cycle up to 5 times
• Handles up to 14 NiCd or NiMH cells, or 4S LiPo
packs
• Features a rugged 4-direction membrane
touchpad – and a very simple programming menu
• The blue backlight on the 2 x 16 LCD screen is a
feature highly requested by modellers
• Unit is enclosed in a durable aluminium case
Price: £63.00
Quantity:
EQ-5 Li-Po Balancer 1~5 Cell
Ref: O-IPBAL-15
The EQ-5 is a compact unit for balancing the voltages of Li-Po batteries in 2 to 5 cell packs. Simple to use, this reliable balancer will ensure that you get the best performance from your Li-Po battery.
• Inline or independent operating modes
• 2 to 5 cell Li-Po use only
• Maximum current 3 Amps
(6 Amps with option HD harnesses)
• LED connection and status display
Price: £24.00
Quantity:
Constellation Charger
Ref: O-IP3000
Constellation Charger
Price: £65.00
Quantity:
Taurus Charger w/EQ6+ Balancer
Ref: O-IP3001
PROGRAMMABLE CHARGER, DISCHARGER AND CYCLER
The new Pro-Peak Taurus is an innovative multi function charger far superior to existing conventional chargers. This unit is especially designed to maximize charge efficiency using its own unique algorithm. The integral 2 line, 16 character LCD screen displays various information relating to the operating modes and adjustment parameters, as well as key functions – such as the battery charge state, which shows the percentage of capacity remaining.Taurus is very user friendly – even for beginners – thanks to its 2 automatic and 10 intelligent selectable 'battery parameter' manual memories.
The manual 10 memories, containing factory pre-set battery parameters, can be re-programmed to store your own standard battery pack parameters so that you can obtain the same precise results whenever you charge.
• 1~30 Cell Ni-Cd/Ni-MH
• 1~12 Cell Li-Ion/Li-Po/Li-Fe
• 1~6 Cell Lead-Acid
• Charge Current: 0.1-10A
• Discharge Current: 0.1-10A
• 2 Automatic Memories
• 10 User Selectable Memories
• Zero Current Voltage Check
•Suitable for operation with a 12v Lead-Acid (Pb) battery or 10-15v DC Power Supply
Up to 2C Charging!
Price: £89.00
Quantity:
Charger for Li-Po Battery XRB
Ref: Z-H0301-033
Charger for Li-Po Battery XRB
Price: £39.99
Quantity:
Mains Charger – 7.2 Volt
Ref: O-BFB203
Mains Charger – 7.2 Volt
Price: £10.99
Quantity:
Direct Current Meter – Wattage
Ref: P-WATTDCM
• All information on one screen
• Voltage range 0~60 volts
• Current range 0~99 amps
• Silicone wires with Tamiya
style connectors
• Lightweight
22.34! 22.34!
Unlike its
competitors
this one model
does it all!
Price: £33.00
Quantity:
Elite Charger
Ref: O-IP3010
Top of the Pro-Peak range, the Elite is a fully programmable, computerised competition charger, discharger and cycler. With Linear, Reflex, Impulse & 4-Step charge regimes for Ni-Cd/Ni-MH, together with a massive graphical display that offers unparalleled charge/discharge information, the Elite has 10 programmable battery memories and motor break in function.
• Input Voltage Range: 11~15v DC
• Charge or Discharge 1~10 cell Ni-Cd or Ni-MH and 1~4 cell
Li-Po batteries
• Charge Current Rate: 0.1~8.0 Amp
• Discharge Current Rate: 0.1~20.0 Amp
• Output Connection: JST Connector
• Input Connection: 4mm Gold Banana
Price: £83.00
Quantity:
Auto Battery Discharger – 6~7 Cell
Ref: O-MG600
Auto Battery Discharger – 6~7 Cell
Price: £5.99
Quantity:
Pro-Peak 2v 500mah SLA Charger
Ref: O-IP1002
Pro-Peak 2v 500mah SLA Charger
Price: £8.99
Quantity:
Mains Charger – 2 Volt
Ref: O-BFB202
Mains Charger – 2 Volt
Price: £10.99
Quantity:
Rx Dual Batt Charger 6.0v 185/250mA
Ref: P-FBRX18/25-6-0
Rx Dual Batt Charger 6.0v 185/250mA
Price: £14.99
Quantity:
Dual NiCad Charger (Sanwa Z)
Ref: P-IRV360Z
Dual NiCad Charger (Sanwa Z)
Price: £14.99
Quantity:
Glowstart Charger – 240V
Ref: L-IRVGSCH1
Glowstart Charger – 240V
Price: £6.99
Quantity:
Tx/Rx NiCad/Ni-MH Charger 70/120mA
Ref: P-FBC20D/4
Supplied with all nicaded Futaba systems, this 240v mains charger has combined transmitter and receiver outputs with two separate LED charge indicators. Two versions are available – one with 70mA receiver and transmitter output and one with an increased receiver output of 120mA, that's ideal for today's higher capacity battery packs. Both are designed for overnight battery charging.
Price: £11.99
Quantity:
Great Planes Triton Thermal Probe
Ref: O-GPMM3151
Great Planes Triton Thermal Probe
Price: £6.99
Quantity:
240V AC Charger (UK) Sabre
Ref: O-EF165220UK
240V AC Charger (UK) Sabre
Price: £7.99
Quantity:
Jeti CHAR30 Charger Ncd/Nimh/LiPo
Ref: O-JECHAR30
Innovative charger for charging of NiCd/NiMh, Li-Pol/Li-Ion batteries using both acoustic and visual
indication of charging progress. Extended current range for charging of small Li-Pol cells. New software reduces the charging time of Li-Po or Li-Ion cells by 10-20% in most cases.
Price: £49.99
Quantity:
Wattage 12V Charger (2~10 Cells)
Ref: O-WATTCHGR1
Wattage 12V Charger (2~10 Cells)
Price: £29.99
Quantity:
Gamma AC/DC Peak Detect Charger
Ref: O-GAM01
Gamma AC/DC Peak Detect Charger
Price: £29.99
Quantity:
Jeti Mini Charger (Ncd/Nimh) 12v DC
Ref: O-JECHGR
Jeti Mini Charger (Ncd/Nimh) 12v DC
Price: £22.99
Quantity:
Pro-Peak 300 7.2V DC D/Peak F/Chgr
Ref: O-IP2300
These are low cost lightweight mini chargers for 6 cell packs.
Specification:
• 12v Input voltage
• Charge 6 cell, 7.2v battery packs
• Charge current for O-IP2300 is 3Amp
• Charge current for O-IP2150 is 1.5Amp
• Trickle charges when fast charge completed.
Price: £14.99
Quantity:
Leads (2,3,4&5 Cell) EQ-5 Hi-Amp
Ref: O-IPBAL-LDH
Optional heavyduty setsee O-IPBAL-15 and O-IPBAL-16
Price: £8.99
Quantity:
Mains Charger for B-SUB002
Ref: O-SUB003
Ideal for many of the small battery packs in use today, this charger is suitable for both NiCad and Ni-Mh battery packs.• Input 240v~50Hz 8.7w• Output 12v 300mA
Price: £14.99
Quantity:
Pro-Peak 150 7.2V DC D/Peak F/Chgr
Ref: O-IP2150
These are low cost lightweight mini chargers for 6 cell packs.
Specification:
• 12v Input voltage
• Charge 6 cell, 7.2v battery packs
• Charge current for O-IP2300 is 3Amp
• Charge current for O-IP2150 is 1.5Amp
• Trickle charges when fast charge completed.
Price: £14.99
Quantity:
Leads (2,3,4&5 Cell) EQ-5 Std.
Ref: O-IPBAL-LD
Supplied with EQ-5see O-IPBAL-15
Price: £5.99
Quantity:
Temp. Sensor w/Lead (Constellation)
Ref: O-IPTS
Temp. Sensor w/Lead (Constellation)
Price: £4.99
Quantity:
Online Shop
>
ACCESSORIES
>
Ripmax Chargers
